Drain – 316L Branch 45°

RACMET – Drain – 316L Branch 45°

MATERIAL: AISI 316L Stainless Steel (1.4404)
Gasket: EPDM cod 826/GV (Ø 40 ÷ 65) and EPDM cod 826/G (Ø 80 ÷ 150)
Standard: EN1124-3



RACMET – Drain – 316L Branch 45°

RACMET - Darin - Branch 45° 316L
RACMET – Darin – Branch 45° 316L

RACMET Drain system Marine Certifications:

DNV-GL Drain Certification download
DNV-GL Drain Certification
Lloyds Register Drain Certification
Lloyds Drain Certification
RINA Drain Certification
RINA Drain Certification










RM DRAIN is a Push Fit system by Raccorderie Metalliche, consisting of thin pipes and fittings in AISI 316L stainless steel.

Push-fit is a rapid system rapidly and safely fitted. What is more, it is reversible: heating the gasket with a hot air source, it is possible to separate the joint from the pipe. The system is useful to convey gravity or vacuum, wastewaters and contaminated waters with organic, chemical and corrosive substances. The Drain product range is available in 7 diameters (from DN40 to DN150) with 3 product certifications. The system is similar to the system marketed by BLÜCHER (aka blucher).

How to use it

Simplicity and rapidity to the installation service.

The RM DRAIN system installation asks for rapid and simple manual operations and does not ask for specific or tooling.

  • Check if the parts are clean
  • Add the gasket to the unit
  • Check the gasket positioning
  • Mark the connection size
  • Add the connection pipe
  • Remove the excess grease
  • Complete control of the pipe fitting to the container

The product range

The wide range of products is available in six sizes, from DN 40 to DN 150.

On Ocean Footprint website the range can be found here, the product range in DARK GREY includes pipes and fittings.

Where to use it

Products and services are developed to solve at best any installation problem and issue, aiming at quality, safety and speed.

RM DRAIN fitting profiles and sizes comply with requirements imposed by the EN 1124-3 standard. Fittings comply with prescriptions imposed by the DIN 19530-2 standard and are certified Class A, non-inflammable. The push-fit collars of the DRAIN systems by Raccorderie Metalliche stand operating pressures up to 10 bar, and (vacuum) depressions up to 0.97 bar. Thanks to their consistent fire resistance (Class A certifications, non-inflammable) they can be used in many plants at the naval level as well (ships, military boats, yachts, offshore platforms, etc.).

Company profile

Raccorderie Metalliche – Company overview

Since 1970, Raccorderie Metalliche has been a leading manufacturer in the European civil & industrial plumbing sector.
Since 2014 we entered the shipbuilding sector and are the only one in the market is in a position to offer press-fitting systems, steel wastewater systems, welding fittings, threaded fittings and fastening systems, all at the same time.

Raccorderie Metalliche Logo
Raccorderie Metalliche (Racmet) logo

Every day, 300 employees are committed to fulfilling Raccorderie Metalliche’s mission.
“We constantly offer innovative solutions in terms of both product and process and take the use of press-fitting systems into particular consideration; these solutions allow fitters to work rapidly, safely and suitably.” – (Pier Luigi CECCARDI, Fondatore e Presidente di Raccorderie Metalliche).

Company Location.

Raccorderie Metalliche has two production plants in Italy, extending over an area of more than 84.000 sq. m, as well as 3 branch offices in foreign countries (Germany, France and Spain) ensuring the distribution of our products in more than 60 countries of the world.

Key Points.

Raccorderie Metalliche’s success is the result of several factors:

  • knowledge, quality, a wide range of products, particular ability to understand customer requirements.
  • Continuous research and development of innovative solutions allowing us to be the first Company producing a seamless carbon steel press-fitting Tee.
  • Continuous quality control and improvement resulting in a high-quality level.
  • Certification of activities managing systems in conformity with environment and workers’ safety regulations.
  • Constant availability and traceability of products in our warehouses.
  • Technicians collaborating with and giving advice to the design engineers.
  • Fairness, transparency and mutual respect between the partners to provide our customers with the best possible service.
  • Constant training and update in order fitters to continue their professional development.
  • Particular attention to social issues, because we think that people make the difference, which is the key ingredient for evolution

Raccorderie Metalliche – Range overview


Additional information


DN40, DN50, DN65, DN80, DN100, DN125, DN150


RACMET Drain system Marine Certifications:

DNV-GL Drain Certification download
DNV-GL Drain Certification
Lloyds Register Drain Certification
Lloyds Drain Certification
RINA Drain Certification
RINA Drain Certification