RACMET marinePRES CuproNickel 90/10 Male Threaded Adaptor
RACMET marinePRES CuproNickel 90/10 Male Threaded Adaptor
MATERIAL: CuNi 90/10 (CuNi10Fe1.6Mn)
O-RING: FKM green
Uses Include: Heating, Cooling, Solar Thermal, Compressed Air, Fire Protection Systems, Process Water, Wastewater, Sea Water
Description
RACMET marinePRES CuproNickel 90/10 Male Threaded Adaptor
Thread: BSP (EN 10226-1 – ex ISO 7/1)
Cupronickel press-fit plumbing system suitable for:
– Heating
– Cooling
– Solar Thermal
– Compressed Air
– Fire Protection Systems
– Process Water
– Wastewater
– Sea Water
Press-fitting Systems
The most effective and efficient way to make an installation….
Pressfitting is a joining between pipes with fittings fitted through electro-mechanical pressing machines. Pressing permanently deforms the fitting on the pipe thus leading to a perfect mechanical joint, while the O-Ring provides for the hydraulic tightening connection. Pressing provides for a constant quality joining, easily reproduced and with a minimum physical effort by the operator
Safety, speed, reliability
Copper brazing is the most widely used method in the sanitary and plumbing sector. It asks for expertise and skills, long execution time and involves hot works and free flames. In case of maintenance or refurbishing, generally it is necessary to work in contact with inflammable materials, where the fire risk is very high
An alternative to brazing is the use of plastic pipes, adhesively jointed. No risk of fires connected to welding but cement resins need hours to dry, depending on the
…no hot works…
Press-fitting stands out with many benefits. It lowers the execution times and it is safer: jointing is carried out at room temperature, with no glues, resins or free flames; the operator works in safety, even when in contact with inflammable materials. Pressing asks for 5 seconds for small diameters and up to 40 seconds for bigger diameters, consistently cutting installation times. What is more, fittings once pressed can be tested thus avoiding cost and downtimes. A 25 to 50% installation time reduction as reported by the company installers, on plants using big diameter pipes
Press-fitting provides for the same benefits even when compared to threaded joints, as it is free of dirt and cuts depending on the threading process. No need to prepare the fittings, with hemp or Teflon as any joint comes with factory mounted O-Rings
Simple steps for reliable and defined results
The electromechanical tool presses the joint on the pipe through its jaws. The connection is permanent and irreversible and permanent. Pressing parameters such as pressure strength and time. Battery operated tools contribute to reduced weights and furthermore to simplify the job for the installer
Additional information
| Pipe Size | 15mm, 18mm, 22mm, 28mm, 35mm, 42mm, 54mm, 76.1mm, 88.9mm, 108mm |
|---|---|
| Male Thread | ½", ¾", 1", 1¼", 1½", 2" |
Downloads
Technical Handbooks
RACMET – Technical Handbook – English (rev 7)
RACMET – Technical Handbook – Fire protection systems – English (Rev 1)
RACMET – Technical Handbook – Compressed Air – English (Rev 0)
RACMET – Technical Handbook – Nebulisation systems – English (Rev 0)
RACMET – Technical Handbook – Steam – English (Rev 0)
Product Certifications
BV – Bureau Veritas
Lloyd’s Register
RINA – Registro Italiano Navale
DNV – GL
ABS – American Bureau of Shipping
CCS – China Classification Society
About RACMET
Company profile
Since 1970, Raccorderie Metalliche has been a leading manufacturer in the European civil & industrial plumbing sector.
Since 2014 we entered the shipbuilding sector and are the only one in the market being in a position to offer press fitting systems, steel wastewater systems, welding fittings, threaded fittings and fastening systems, all at the same time.
Every day, 300 employees are committed to fulfilling Raccorderie Metalliche’s mission.
“We constantly offer innovative solutions in terms of both product and process and take the use of press fitting systems into particular consideration; these solutions allow fitters to work rapidly, safely and suitably.” – (Pier Luigi CECCARDI, Fondatore e Presidente di Raccorderie Metalliche).
Company Location.
Raccorderie Metalliche has two production plants in Italy, extending over an area of more than 84.000 sq. m, as well as 3 branch offices in foreign Countries (Germany, France and Spain) ensuring the distribution of our products in more than 60 Countries of the world.
Key Points.
Raccorderie Metalliche’s success is the result of several factors:
- knowledge, quality, a wide range of products, particular ability to understand customer requirements.
- Continuous research and development of innovative solutions allowing us to be the first Company producing a seamless carbon steel pressfitting Tee.
- Continuous quality control and improvement resulting in a high-quality level.
- Certification of activities managing systems in conformity with environment and workers’ safety regulations.
- Constant availability and traceability of products in our warehouses.
- Technicians collaborating with and giving advice to the design engineers.
- Fairness, transparency and mutual respect between the partners to provide our customers with the best possible service.
- Constant training and update in order fitters to continue their professional development.
- Particular attention to social issues, because we think that people make the difference, which is the key ingredient for evolution.
Tools
Tooling
Certified tooling for any Raccorderie Metalliche press-fitting system
The press-fitting system consists of three key components: the joints, the pipes and the pressing machines
The machines should press the joint on the pipe. This electro-mechanical tooling acts on the joint pressing through jaws and collars according to the specific diameter, thus deforming the joint and providing for the required mechanical tightness. Each pressing machine accurately presses the joint for the best possible and repeatable pressing. Raccorderie Metalliche (AKA RACMET) decided to turn to Klauke and Novopress, world leaders in Press-fitting tools. Raccorderie Metalliche in fact approves and certifies plants made with such tooling for water and gas applications as well. Being fundamental for the Press-fitting system, the different models and relating pressing machine performances are tested by the Raccorderie Metalliche laboratory, as to always offer the best possible results to installers 
Novopress ACO203 Battery press fitting tool
Related products
-
RACMET marinePRES CuproNickel 90/10 90 Degree Elbow Male To Female
This product has multiple variants. The options may be chosen on the product page -
Drain – 316L Cleanout port
This product has multiple variants. The options may be chosen on the product page -
RACMET marinePRES CuproNickel 90/10 Branch Tee Female BSP Outlet
This product has multiple variants. The options may be chosen on the product page -
MarinePres – Copper Nickel Pipe
This product has multiple variants. The options may be chosen on the product page