Sale!

Aqua Air – Fresh Air Make Up FAMU – AQFAH

£6,086.42£9,400.97

CONVERSION TABLE:
200CFM = 340m³/hr
400CFM = 680m³/hr
600CFM = 1020m³/hr
900CFM = 1530m³/hr

Clear

Description

Aqua Air Fresh Air Make up units are made from corrosion-resistant aluminium and contain hi-static fan motors for extensive fresh air duct networks.  With removable panels for access to an internally insulated bod, (to avoid condensation), maintenance is an easy task to undertake. The inlets are protected by a washable filter that is followed by an internally mounted INCOLOY rod type heating elements for cold weather operation down to -5°C (23°F). The unit integrates a modulating chillwater flow valve for precise air temperature control in the cooling mode

Reaching high Inside Air Quality (IAQ) is the main driver behind the need for fresh air make-up units. Whether it is the removal of contaminants in the air or providing a comfortable temperature, there are many ways to improve IAQ. In most marine applications, a make-up air solution is a much more effective method compared to typical ventilation fans at reaching an IAQ that greatly improves the safety and comfort of those inside while also not affecting energy efficiency

On many commercial and larger pleasure vessels the fresh air make up is stated as a formula and this rate can vary based on the flag state and is expressed in relation to the number of people expected to be using the boat

Aqua-Air FAMU units technical specification (Single Phase)
Image of Aqua-Air Fresh Air Make Up units technical specification (Single Phase)
Aqua-Air FAMU units technical specification (Three Phase 60hz)
Image of Aqua-Air Fresh Air Make Up units technical specification (Three Phase 60hz)
Aqua-Air Fresh Air Make Up units technical specification (Three Phase 50hz)
Image of Aqua-Air Fresh Air Make Up units technical specification (Three Phase 50hz)

FEATURES

  • Four models to choose from ranging in size from 200 to 900 CFM
  • Units are constructed of corrosion resistant aluminium
  • Hi-static fan motors for extensive fresh air ducting networks
  • Removable access panels on both the top and sides are insulated internally to prevent external condensation
  • Washable air inlet filter
  • Internally mounted INCOLOY rod type heating elements for cold weather operation down to -5°C (23°F)
  • Modulating chilled water flow valve for precise air temperature control in the cooling mode
  • Modulating SCR heater element control for precise air temperature control in the heating mode
  • Insulated and internally coated aluminium drain pan with ant-slosh foam media inside
  • Condensate outlets on both sides of the fan coil
  • All unit coil assemblies are pressure tested to ensure leak-proof performance
  • All units are test run to assure proper operation and air flow output

Additional information

Capacity

200CFM, 400CFM, 600CFM, 900CFM

Power (AC)

230V 50-60hz 1ph, 230V 60hz 3ph, 380V 50hz 3ph, 460V 60hz 3ph