RACMET inoxPRES AISI AISI 304 Nebulizer
RACMET inoxPRES Nebulizer
MATERIAL: AISI 316L Stainless Steel (1.4404)
O-RING: EPDM black
RACMET AISI 304 inoxPRES Nebulizer Uses Include: Potable Water, Fuel (when with green FKM O-ring), Heating, Cooling, Solar Thermal (when with green FKM O-ring), Compressed Air, Fire Protection Systems, Process Water
Description
RACMET inoxPRES AISI AISI 304 Nebulizer
AISI 304 Stainless Steel Nebulizer Marine Certifications:
- Bureau Veritas
DNV-GL
Lloyd’s Register
WRAS
RINA
American Bureau of Shipping (ABS)
China Classification Society (CCS)
inoxPRES Nebulizer uses Include:
- Potable Water,
- Fuel (when with green FKM O-ring),
- Heating, Cooling,
- Solar Thermal (when with green FKM O-ring),
- Compressed Air,
- Fire Protection Systems,
- Process Water
Press-fitting Systems
The most effective and efficient way to make an installation….
Pressfitting is a joining between pipes with fittings fitted through electro-mechanical pressing machines. Pressing permanently deforms the fitting on the pipe thus leading to a perfect mechanical joint, while the O-Ring provides for the hydraulic tightening connection. Pressing provides for a constant quality joining, easily reproduced and with a minimum physical effort by the operator
Safety, speed, reliability
Copper brazing is the most widely used method in the sanitary and plumbing sector. It asks for expertise and skills, long execution time and involves hot works and free flames. In case of maintenance or refurbishing, generally it is necessary to work in contact with inflammable materials, where the fire risk is very high
An alternative to brazing is the use of plastic pipes, adhesively jointed. No risk of fires connected to welding but cement resins need hours to dry, depending on the
…no hot works…
Press-fitting stands out with many benefits. It lowers the execution times and it is safer: jointing is carried out at room temperature, with no glues, resins or free flames; the operator works in safety, even when in contact with inflammable materials. Pressing asks for 5 seconds for small diameters and up to 40 seconds for bigger diameters, consistently cutting installation times. What is more, fittings once pressed can be tested thus avoiding cost and downtimes. A 25 to 50% installation time reduction as reported by the company installers, on plants using big diameter pipes
Press-fitting provides for the same benefits even when compared to threaded joints, as it is free of dirt and cuts depending on the threading process. No need to prepare the fittings, with hemp or Teflon as any joint comes with factory mounted O-Rings
Simple steps for reliable and defined results
The electromechanical tool presses the joint on the pipe through its jaws. The connection is permanent and irreversible and permanent. Pressing parameters such as pressure strength and time. Battery operated tools contribute to reduced weights and furthermore to simplify the job for the installer
Additional information
Size | 15mm, 20mm, 30mm, 40mm, 50mm |
---|
Related products
-
RACMET marinePRES CuproNickel 90/10 Equal Tee
This product has multiple variants. The options may be chosen on the product page -
RACMET marinePRES CuproNickel 90/10 Branch Tee Female BSP Outlet
This product has multiple variants. The options may be chosen on the product page -
InoxPRES – 316L Branch Tee – Fem BSP out
This product has multiple variants. The options may be chosen on the product page -
RACMET marinePRES CuproNickel 90/10 90 Degree Elbow Female To Female
This product has multiple variants. The options may be chosen on the product page