Nyalic® Corrosion Protectant for Electrical Panels
Nyalic is used to coat electrical panels and electronic connections, pc boards, battery terminals and other types of connections on boats and ships
Nyalic can protect equipment from rust by stopping water and air coming into contact with the substrate
Corrosion alone accounts for approximately 40% of all equipment failures in industrial facilities. Facilities located in potentially corrosive environments such as seacoasts, industrial sites, farms and many other areas and environments are exposed to various threats of salt, fertilizer, urea and gases and water vapour as a result of high relative humidity
Furthermore, industry reports indicate that 50% to 60% of electrical downtime can be attributed to open or intermittent connections. Harsh industrial environments increase the risk of corrosion and chemical attack on metals used in wire terminal connections and wiring harnesses, potentially affecting electrical reliability. Intermittent wire connections are costly and time-consuming problems that are unacceptable. Wet, dirty, and dusty electrical and electronic components are at an increased risk of corrosion or chemical attack on equipment
Corrosion alone accounts for approximately 40% of all equipment failures
Bare metals, electrical connections and electronic devices must be adequately protected against corrosive atmospheres and chemical attack to ensure both good mechanical and electrical performance. In most cases, a conformal coating is applied to circuit boards and connections or a dielectric grease is applied to battery terminals and wiring connections. In too many instances, these applications are not sufficient to reduce the failures caused by corrosion
Nyalic is a self-annealing product
Nyalic Marine Kit – MRN-KT2
Nyalic is used to coat electrical and electronic connections, pc boards, battery terminals and other types of connections on boats and ships, on AG & construction equipment, inside panels, in engine compartments, anywhere that corrosive elements and moisture can cause electrical component failure
While not a conformal coating by the strictest definition (Nyalic provides protection with film builds of 5µm – 10µm vs. the usual 25µm – 250µm), Nyalic has proven to be an effective alternative for coating sensitive electrical and electronic connections and boards. A significant reduction in downtime caused by electrical failures has been noted in equipment used in highly corrosive environments containing such contaminants as salt, urea and fertilizer. Nyalic is applied to wiring harnesses, and there are no adverse effects to the insulation
Nyalic adheres to the existing Nyalic coating
Nyalic is a self-annealing product. This characteristic is extremely beneficial when working on or swapping out components. Conclude your work, clean the area and use a Nyalic aerosol can to apply more Nyalic to the area. The Nyalic adheres to the existing Nyalic coating
Protect your electrical and electronic components and connections with Nyalic
Image showing Nyalic product range
Nyalic does not yellow, crack or peel and is highly UV resistant
The high-performance clear coat is impermeable and protects against corrosion by sealing the surface. Nyalic provides an ultra-thin, water-clear layer of protection that remains thermally stable and flexes with the host substrate. Nyalic is self-level and self-annealing making repairs easy and seamless with a Nyalic aerosol can. Nyalic does not yellow, crack or peel and is highly UV resistant. It retains gloss and reduces fading. Metals coated with Nyalic have long-term sustainability and appearance
Nyalic is non-conductive and does not affect heat transfer
Nyalic provides protection against corrosion caused by moisture, surface contamination, chemicals and chemical fumes. Nyalic is non-conductive and does not affect heat transfer. As a clear coat, unlike paint, Nyalic allows for inspections of underlying surfaces. Ideal for use in and around water treatment plants, storage facilities, fertilizer plants, swimming pools, food & beverage facilities, plastics manufacturing, pulp & paper plants, smelters and battery manufacturing plants
Nyalic also protects metal surfaces including copper, brass, stainless steel, bronze and galvanized. Nyalic is used to coat and protect stressed steel roofs and siding panels (Cor-Ten®). Nyalic helps to reduce maintenance and protects against tea staining, white rust and black streaks. Nyalic works to protect surfaces located in coastal areas from corrosion caused by exposure to wind-driven salty sea spray and sea air
How to use a Nyalic aerosol on your Electrical Panels
