Description

Grande – Safety Dust Masks – Face Protection – FFP3 NR Moulded Valved Respirator (20 pack)

…factory production capacity of 1 million masks per month…

Bulk Enquiries

Ocean Footprint has a very strong relationship with the Grande Factory and can supply orders of up to the full factory production capacity of 1 million masks per month on request, please just get in touch with us here for any bulk enquiries

Equivalent to US N99 Rating

The American category N99 refers to the filtration factor of the masks, N99 offers 99% filtration factor so these FFP3 masks offer protection of at least 99%. Our masks are sealed in packs of 20 as supplied from the manufacturer, these are sealed in a plastic bag in hygienic conditions. We only sell them in the pack quantity of 20 to ensure that the product is sealed and safe for use, were we to decant them into smaller packs then we could not be able to assure the user that they are clean and safe for use. The FFP2 masks offer only 94% protection and would not meet the N95 (95%) filtration factor. The product has been kept in a warm dry warehouse and has not been tampered with in any way

About the product

The large surface area ensures little breathing resistance and an adjustable head-strap adds to the secure fit. A large exhalation valve reduces heat build-up and improves your comfort when wearing for long periods. The respirator is fitted with an activated carbon pre-filter. The valve is low profile so does not hinder your field of vision. The respirator masks are compatible with various safety eyewear

20 X FFP3 NR Moulded Safety Dust Masks Face Protection Mask Valved Respirator,

FFP3 – Protection against non-toxic low to average toxicity and high toxicity solid and liquid aerosols (e.g. Oil-Mists) in concentrations up to 50 x MAC/OEL/TLV or 20 x APF

FFP3 valved filters are the highest level of respiratory protection against airborne particles. All our FFP3 valved dust masks are manufactured according to Health & Safety Executive standards and EU regulations (EN 149: 2001 & CE 0194). These FFP3 valved dust masks protect from hazardous vapours and minute dust found in asbestos environments, chemical-related jobs

Grande – FFP3 NR Layers

The Grande FFP3 respirators are constructed from 6 layers of filtration – with a comfort seal to allow for comfort and additional seal around the face, plus a valve to ease breathing comfort

Layer 1 – Non-woven layer (Spunbon)
Layer 2 – Hot Air filter cotton (Pre-filter)
Layer 3 – Hot Air filter cotton (Pre-filter)
Layer 4 – Hot Air filter cotton (Pre-filter)
Layer 5 – Hot Air filter cotton (Pre-filter)
Layer 6 – Non-woven Filtration layer (Meltblown)

FFP3 NR Moulded Safety Dust Mask Features:

• Active high-filtration mask with 6 layers
• Filter efficiency level of 99%(FFP3) or greater
• Up To 50 Times Protection Against Non-Toxic Dusts, Fibres & Aqueous Mists
• Unique fastener design for adjustable straps
• High filtration efficiency and low breathing resistance
• Conforms to Health and Safety Regulation EN149:2001:2009
• Moulded and valved for added comfort during prolonged use
• Adjustable nosepiece & inner foam

Our FFP3 Disposable Moulded Valved Dust Masks are ideal For Painting, Sanding, Welding, Machine Work, DIY And Other Industrial Tasks

The following information is taken from the HSE website

What’s your problem?

When working, you can breathe in a range of dusts, vapours, fumes and mould spores or germs that can cause serious lung diseases, such as chronic bronchitis. Severe cases may mean that you have to give up work and face the economic and social consequences

What can you do about it?

Industry bodies and the Health and Safety Executive (HSE) are committed to reducing these diseases. Some industries can achieve this by working with less harmful substances or by containing or removing the hazard

This isn’t always possible in boat building, so when doing very dusty work, you might need to wear respiratory protective equipment (RPE) as well as enclosing and extracting the dust and using good work practices to reduce the health risks

Many types of RPE can protect you against dusts, but small boat manufacture enterprises are most likely to use lightweight disposable respirators, also known as ‘dust masks’

To help ensure you are protected, all respirators provided for use at work must be CE marked to show that the design has been tested to a recognised standard. They must also be marked with that standard, which for disposable respirators is EN 149: 2001. Additional markings, such as FFP1, FFP2 or FFP3, indicate the protection level that you can get if the respirator is a good fit and you use it correctly

The higher the number, the better the protection. FFP1, FFP2 and FFP3 respirators can reduce the amount of dust you breathe by factors of 4, 10 and 20 respectively. An FFP3 respirator is advisable if you are exposed to high levels of aerosols, dust or mould spores

Manufacturers must provide written information with each box or pack that includes details such as the safe use of respirators and their limitations. They may also give details of how to fit them correctly and check for a good fit. You may not get this information if you buy a single respirator from a larger pack. When you buy disposable respirators this way for use at work, make a point of asking for a copy of the manufacturer’s technical information

If it leaks it doesn’t protect

Even if you have this information, finding a suitable respirator is not simply a matter of choosing a model you like the look of or the cheapest. Not all faces are the same and neither are disposable respirators. You might need to try different makes or sizes to find one that fits without leaking around the seal and letting dust in. A respirator that depends on face fit is useless if you have a beard or thick beard stubble.

The only way you can know if the seal is good enough is by having a proper respirator fit test. At present this is also the only way of meeting legal requirements. The respirator manufacturer’s helpline, testing companies and reputable suppliers will be able to advise you.

You should carry out a pre-use check every time you put on your respirator. Always check that it is fitted according to the manufacturer’s instructions, eg ensure that the straps and strip for moulding the respirator around your nose are correctly adjusted, then hold the mask in place and breathe in or out sharply. You should readjust the respirator if you detect any leakage around your face or your glasses steam up when you breathe out.

What else?

FFP1, FFP2 and FFP3 are designed to filter out dust only. They must not be used where there is an oxygen-deficient atmosphere or harmful gases and vapours.

You should discard disposable respirators at the end of the shift or sooner if they are heavily contaminated. Never hang up a respirator in a dusty place for use later on.

If wearing a respirator interferes with spectacles, hearing protection or head protection, a powered visor may be more suitable.

What shouldn’t you wear?

Some retailers also sell products known as nuisance dust masks or comfort masks that look like dust respirators but are not marked with CE or with any standard. They often have only one head strap. These are not intended for use when a respirator should be worn. You should never use a nuisance dust mask instead of an approved respirator when working as that could cause occupational asthma. Packaging for these masks might be labelled, ‘This product does not provide respiratory protection’, or something similar

Face masks are Personal Hygienic Products. We make great efforts to ensure that the product is as it left the factory. We are unable to accept a return or replace this product even if the parcel appears untouched.
Please read ALL of our descriptions and accept “NO RETURN / REPLACEMENT / REFUND POLICY” before buying

Further reading

BBC – Article: Coronavirus: ‘Deadly masks’ claims debunked

BBC – Article: Coronavirus: Who should wear a face mask or face covering?

BBC – Article: Find out which masks offer the most protection and why

BBC – Article: Coronavirus: Why some countries wear face masks and others don’t

WHO – Resources: Coronavirus disease (COVID-19) advice for the public: When and how to use masks